Talisman Multi 1 Meter Boxes Two types of meter boxes are available with either analogue or digital meters for use with incomers of 250A or 400A rating. Analogue Models (1) Voltmeter and selector switch, ammeter and selector switch, phase indication lamps. (2) Voltmeter and selector switch, 3 separate ammeters and selector switch, phase indication lamps. Digital Models Multi functions for voltage current and power measurement.

Talisman Multi 1 Meter Boxes
Meter Box	Busbar Rating	Incomer	Cat. No.
(1) Analogue	250A	'F' Frame	TGAMB200
(1) Analogue	250A	Lugs	TGAMBLK200
(2) Analogue	250A	'F' Frame	TG3AMB200
(2) Analogue	250A	Lugs	TGAMBLK200
(1) Analogue	400A	'J' Frame	TGAMB250
(1) Analogue	400A	'K' Frame	TGAMB400
(1) Analogue	400A	Lugs	TGAMBLK400
(2) Analogue	400A	'J' Frame	TG3AMB250
(2) Analogue	400A	'K' Frame	TG3AMB400
(2) Analogue	400A	Lugs	TG3AMBLK400
Digital	250A	'F' Frame	TGDMB200
Digital	250A	'J' Frame	TGDMB250
Digital	400A	'K' Frame	TGDMB400
Digital	400A	Lugs	TGDMBLK400

Talisman Multi 1 Extension Boxes
Box Description	Height	Width	Cat. No.
Top/Bottom - Screw on Cover	215mm	700mm	TGX215
Top/Bottom - Screw on Cover	300mm	700mm	TGX300
Corner - Screw on Cover	215mm	560mm	TGXC215
Corner - Screw on Cover	300mm	560mm	TGXC300
Side - Hinged Cover	450mm	560mm	TGXS450
Side - Hinged Cover	900mm	560mm	TGXS900
Side - Hinged Cover	1050mm	560mm	TGXS1050
Side - Hinged Cover	1200mm	560mm	TGXS1200
Side - Hinged Cover	1350mm	560mm	TGXS1350
Side - Hinged Cover	1650mm	560mm	TGXS1650

Talisman Multi 1 Horizontal Connection Kits
Description	Max. Rating	Cat. No.
Horizontal Inter-Connection Kit	400A	TG4CKH

Top | Home | E-mail

Talisman 2 Meter Packs
Panelboard Type	250A MCCB	400A MCCB	630A MCCB
Meter Pack	Incomer	Incomer	Incomer
Talisman 2 Ammeter + Voltmeter Pack	T2MP2	T2MP4	T2MP6
Talisman 2 Ammeter + Voltmeter + kWh Pack	T2MPK2	T2MPK4	T2MPK6
Talisman 2 kWh Meter Only Pack	T2KP2	T2KP4	T2KP6

Palm Spreader Kits
Description	Max. Rating	Cat. No.
For over 150mm² cables ('J' Frame)	250A	TGSL250
For over 240mm² cables ('K' Frame)	400A	TGSL400

'G' Frame into 'E' Frame Way Adaptors Adaptors suitable for fitting 'G' Frame MCCBs into unused ways of existing Talisman 1 panelboards where *'E' Frame MCCBs previously specified.

'G' Frame Adaptors
Adaptors	Cat. No.
Single Pole MCCB	TPAG1
Triple Pole MCCB	TPAG3

*'E' Frame MCCBs and Talisman 1 Panelboards are now obsolete, and are replaced by 'G' Frame MCCBs and the Talisman Multi 1 Panelboard range.

Surface Mounting Steel Enclosures Surface mounting sheet steel enclosures to accommodate 'G' & 'F' Frame triple pole standard fault level breakers. Enclosures for 'J' & 'K' Frame breakers are available to special order. The units are constructed from sheet steel and finished in an attractive Bill light grey paint finish to match the panelboards (RAL7032). A fully rated neutral terminal is included. Moulded case circuit breakers should be ordered separately.